Quality Inspector - Mechanical - Trinidad

The QA/QC Inspector- Mechanical is responsible for assisting in the field execution of the quality assurance and quality control program by ensuring quality issues/problems within Construction/Engineering are identified, reported and rectified. This role is also responsible for planning, coordinating and reporting on the execution of QAQC plans within Inspection activities/findings as well as inspecting and supervising key hold ITP’s points along with Subcontractors quality personnel on the field.

• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
• Coordinate with Subcontractors quality the correct implementation of Subcontractors Quality Programs.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Liaises with HSSE representatives (internal, client & external) to ensure inherent compliance of documentation with Company and Client safety standards.
• Liaises with Company Construction Superintendent, Construction Coordinators, Field Supervisors and SPA’s as work progresses and provide activity updates in the form of a QA/QC Daily Report covering all assigned Projects.
• Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops which include but not limited to welding, NDE, painting and/or coating, and hydro-testing.
• Review all inspection reports for compliance, with reference to applicable industry codes and site standards/procedures.
• Liaise with the site subcontractors’ QC inspectors for the resolution of site problems.
• Review of sub-contractor procedures and quality documentation such as ITP’s, inspection procedures, drawings, isometrics.
• Review of PQR, WPS and welding qualifications and welding procedures.
• Review of radiograph films as required.
• Punch listing of items as required.
• Review and acceptance of subcontract fabrication work packs including vendor scope.
• Final compilation of dossiers for Construction and client approval prior to project close out.
• Ensure the client is satisfied before, during and after work is completed.
• Performs all other related job functions as required.

• Diploma/Certification in Construction, Mechanical or Industrial Engineering from a recognized institution.
• Certification/Training in Quality (must be based on ISO 9001:2015) from a recognized institution.  (For example CQE, CQA, CQT or CQI).
• Level I or Level II Radiographic Film Interpretation.
• Certified Welding Inspector (CWI) with AWS.
• Non-destructive Testing such as MT, PT, UT, and VT will be an asset.
• A minimum of three (3) years’ experience in a similar position.
• A working knowledge of Construction / Structural / Inspection codes and practices such as API 570, 620 and 650, ASME B31.3, AWS D1.1, API 1104, ASME Section V and IX. NACE standards, ISO 8501 & SSPC Systems.
• Possess direct knowledge of all aspects of heat treatment with the types of equipment such as electrical resistance heating elements, induction coils, or gas fired heaters.
• Shall demonstrate a working a thorough knowledge and proven ability of all phases and types of critical coating applications, methods, and recognized industry standards.
• As a minimum, he shall have experience with: Installation of equipment such as, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction etc
• Actively promotes and personally observes safety and security procedures and uses equipment and materials properly.
• Maintains the highest level of confidentiality and trustworthiness.
• Ability to synthesise complex or diverse information.
• Ability to work effectively, safely and prioritize in a high performance, fast-paced work environment.
• Must be an excellent Team Player.
• Inspires and motivates others to work well and accepts feedback.
• Seeks ways to improve and promote quality and demonstrates accuracy and thoroughness.
• Valid Certificate of Good Character (must not be older than 6 months).
• Preference will be given to national citizens or permanent residents of Trinidad & Tobago.

This role does not provide sponsorship.