QA QC Inspector - Electrical & Instrumentation [Offshore]

Massy Wood is recruiting for an QA QC Inspector (Offshore) with Electrical and Instrumentation specialization and experience in the oil and gas industry.

The QA QC Inspector (Offshore) - Electrical and Instrumentation will assist in the field execution of the quality assurance and quality control program by ensuring quality issues/problems within Construction/Engineering are identified, reported and rectified; provide office support when required and not assigned to an offshore asset; plan, coordinate and report on the execution of QAQC plans within Inspection activities/findings for the Construction/Engineering Department; inspect, supervise and attest key hold ITP’s points along with Subcontractors quality personnel on the field; coordinate with Subcontractors quality the correct implementation of Subcontractors Quality Programs.

• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops which include but not limited to Instrument Calibration, Control Valve testing, Material inspections
• Review all inspection and testing reports for compliance, with reference to applicable industry codes and site standards/procedures.

• Diploma/Certification in Electrical/Instrumentation or Industrial Engineering from a recognised institution.
• Certification/Training in Quality (must be based on ISO 9001:2008) from a recognised institution. (For example, CQE, CQA, CQT or CQI).
• Offshore Experience
• EX Certification
• Wireman License
• A minimum of three (3) years’ experience in a similar position.
• Experience working with E&I material
• Knowledgeable about E&I material storage and Preservation Requirements
• Ability to interpret E&I Drawings
• A working knowledge of Construction / Electrical / Inspection codes and practices such NETA ATS, NEC 500/505, NFPA 70, API 598, API 527
• Inspector shall have direct knowledge of all aspects of electrical testing such as Insulation Resistance testing, Current and Voltage testing
• As a minimum, he shall have experience with: Installation of equipment such as, Measurement Instrumentation, F&G Devices Telecommunication devices, Electrical power and control Cables, Instrument Tubing, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction etc